tycho-protocol-sdk/proto/tycho/evm/v1/common.proto

syntax = "proto3";

package tycho.evm.v1;

// This file contains the proto definitions for Substreams common to all integrations.

// A struct describing a block.
message Block {
  // The blocks hash.
  bytes hash = 1;
  // The parent blocks hash.
  bytes parent_hash = 2;
  // The block number.
  uint64 number = 3;
  // The block timestamp.
  uint64 ts = 4;
}

// A struct describing a transaction.
message Transaction {
  // The transaction hash.
  bytes hash = 1;
  // The sender of the transaction.
  bytes from = 2;
  // The receiver of the transaction.
  bytes to = 3;
  // The transactions index within the block.
  // TODO: should this be uint32? to match the type from the native substream type?
  uint64 index = 4;
}

// Enum to specify the type of a change.
enum ChangeType {
  CHANGE_TYPE_UNSPECIFIED = 0;
  CHANGE_TYPE_UPDATE = 1;
  CHANGE_TYPE_CREATION = 2;
  CHANGE_TYPE_DELETION = 3;
}

// A custom struct representing an arbitrary attribute of a protocol component.
// This is mainly used by the native integration to track the necessary information about the protocol.
message Attribute {
  // The name of the attribute.
  string name = 1;
  // The value of the attribute.
  bytes value = 2;
  // The type of change the attribute underwent.
  ChangeType change = 3;
}

enum FinancialType{
  SWAP = 0;
  LEND = 1;
  LEVERAGE = 2;
  PSM = 3;
}

enum ImplementationType {
  VM = 0;
  CUSTOM = 1;
}

message ProtocolType{
  string name = 1;
  FinancialType financial_type = 2;
  repeated Attribute attribute_schema = 3;
  ImplementationType implementation_type = 4;
}

// A struct describing a part of the protocol.
// Note: For example this can be a UniswapV2 pair, that tracks the two ERC20 tokens used by the pair, 
// the component would represent a single contract. In case of VM integration, such component would 
// not need any attributes, because all the relevant info would be tracked via storage slots and balance changes.
// It can also be a wrapping contract, like WETH, that has a constant price, but it allows swapping tokens. 
// This is why the name ProtocolComponent is used instead of "Pool" or "Pair".
message ProtocolComponent {
  // A unique identifier for the component within the protocol.
  // Can be e.g. a stringified address or a string describing the trading pair.
  string id = 1;
  // Addresses of the ERC20 tokens used by the component.
  repeated bytes tokens = 2;
  // Addresses of the contracts used by the component.
  // Usually it is a single contract, but some protocols use multiple contracts.
  repeated bytes contracts = 3;
  // Static attributes of the component.
  // These attributes MUST be immutable. If it can ever change, it should be given as an EntityChanges for this component id.
  // The inner ChangeType of the attribute has to match the ChangeType of the ProtocolComponent.
  repeated Attribute static_att = 4;
  // Type of change the component underwent.
  ChangeType change = 5;
  /// Represents the functionality of the component.
  ProtocolType protocol_type = 6;
}

// A struct for following the changes of Total Value Locked (TVL) of a protocol component.
// Note that if a ProtocolComponent contains multiple contracts, the TVL is tracked for the component as a whole.
// E.g. for UniswapV2 pair WETH/USDC, this tracks the USDC and WETH balance of the pair contract.
message BalanceChange {
  // The address of the ERC20 token whose balance changed.
  bytes token = 1;
  // The new balance of the token. Note: it must be a big endian encoded int.
  bytes balance = 2;
  // The id of the component whose TVL is tracked.  Note: This MUST be utf8 encoded.
  // If the protocol component includes multiple contracts, the balance change must be aggregated to reflect how much tokens can be traded.
  bytes component_id = 3;
}

// Native entities

// A component is a set of attributes that are associated with a custom entity.
message EntityChanges {
  // A unique identifier of the entity within the protocol.
  string component_id = 1;
  // The set of attributes that are associated with the entity.
  repeated Attribute attributes = 2;
}

// VM entities

// A key value entry into contract storage.
message ContractSlot {
  // A contract's storage slot.
  bytes slot = 2;
  // The new value for this storage slot.
  bytes value = 3;
  // The old value of this storage slot
  bytes previous_value = 4;
}

// A struct for following the token balance changes for a contract.
message AccountBalanceChange {
  // The address of the ERC20 token whose balance changed.
  bytes token = 1;
  // The new balance of the token. Note: it must be a big endian encoded int.
  bytes balance = 2;
}

// Changes made to a single contract's state.
message ContractChange {
  // The contract's address
  bytes address = 1;
  // The new balance of the contract, empty bytes indicates no change.
  bytes balance = 2;
  // The new code of the contract, empty bytes indicates no change.
  bytes code = 3;
  // The changes to this contract's slots, empty sequence indicates no change.
  repeated ContractSlot slots = 4;
  // Whether this is an update, a creation or a deletion.
  ChangeType change = 5;
  // The new ERC20 balances of the contract.
  repeated AccountBalanceChange token_balances = 6;
}

// DCI entities

// An entrypoint to be used for DCI analysis
message EntryPoint {
  // The entrypoint id. Recommended to use 'target:signature'.
  string id = 1;
  // The target contract to analyse this entrypoint on.
  bytes target = 2;
  // The signature of the function to analyse.
  string signature = 3;
  // The id of the component that uses this entrypoint.
  string component_id = 4;
}

// Parameters to trace the entrypoint
message EntryPointParams {
  // The entrypoint id.
  string entrypoint_id = 1;
  // [optional] The component that uses these entrypoint parameters. Currently used for debugging purposes only.
  optional string component_id = 2;
  // The strategy and its corresponding data
  oneof trace_data {
    RPCTraceData rpc = 3;
    // Add more strategies here
  }
}

// RPC tracing strategy with its data
message RPCTraceData {
  // [optional] The caller to be used for the trace. If none is provided a chain default will be used.
  optional bytes caller = 1;
  // The calldata to be used for the trace
  bytes calldata = 2;
}

// A contract and associated storage changes
message StorageChanges {
  // The contract's address
  bytes address = 1;
  // The contract's storage changes
  repeated ContractSlot slots = 2;
}

// Aggregate entities

// A set of changes aggregated by transaction.
message TransactionChanges {
  // The transaction instance that results in the changes.
  Transaction tx = 1;
  // Contains the changes induced by the above transaction, aggregated on a per-contract basis.
  // Contains the contract changes induced by the above transaction, usually for tracking VM components.
  repeated ContractChange contract_changes = 2;
  // Contains the entity changes induced by the above transaction.
  // Usually for tracking native components or used for VM extensions (plugins).
  repeated EntityChanges entity_changes = 3;
  // An array of newly added components.
  repeated ProtocolComponent component_changes = 4;
  // An array of balance changes to components.
  repeated BalanceChange balance_changes = 5;
  // An array of newly added entrypoints. Used for DCI enabled protocols.
  repeated EntryPoint entrypoints = 6;
  // An array of entrypoint tracing parameteres. Used for DCI enabled protocols.
  repeated EntryPointParams entrypoint_params = 7;
}

// A set of storage changes aggregated by transaction.
message TransactionStorageChanges {
  // The transaction instance that results in the changes.
  Transaction tx = 1;
  // Contains the storage changes induced by the above transaction.
  repeated StorageChanges storage_changes = 2;
}

// A set of transaction changes within a single block.
// This message must be the output of your substreams module.
message BlockChanges {
  // The block for which these changes are collectively computed.
  Block block = 1;
  // The set of transaction changes observed in the specified block.
  repeated TransactionChanges changes = 2;
  // The set of all storage changes from the specified block. Intended as input for the Dynamic Contract Indexer.
  // Should be left empty for protocols that do not use the DCI.
  repeated TransactionStorageChanges storage_changes = 3;
}