// @generated
// WARNING: DEPRECATED. Please use common.proto's TransactionChanges and BlockChanges instead.
// This file contains proto definitions specific to the VM integration.

/// A set of changes aggregated by transaction.
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct TransactionContractChanges {
    /// The transaction instance that results in the changes.
    #[prost(message, optional, tag = "1")]
    pub tx: ::core::option::Option<Transaction>,
    /// Contains the changes induced by the above transaction, aggregated on a per-contract basis.
    #[prost(message, repeated, tag = "2")]
    pub contract_changes: ::prost::alloc::vec::Vec<ContractChange>,
    /// An array of newly added components.
    #[prost(message, repeated, tag = "3")]
    pub component_changes: ::prost::alloc::vec::Vec<ProtocolComponent>,
    /// An array of balance changes to components.
    #[prost(message, repeated, tag = "4")]
    pub balance_changes: ::prost::alloc::vec::Vec<BalanceChange>,
}
/// A set of transaction changes within a single block.
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct BlockContractChanges {
    /// The block for which these changes are collectively computed.
    #[prost(message, optional, tag = "1")]
    pub block: ::core::option::Option<Block>,
    /// The set of transaction changes observed in the specified block.
    #[prost(message, repeated, tag = "2")]
    pub changes: ::prost::alloc::vec::Vec<TransactionContractChanges>,
}
// This file contains the proto definitions for Substreams common to all integrations.

/// A struct describing a block.
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct Block {
    /// The blocks hash.
    #[prost(bytes = "vec", tag = "1")]
    pub hash: ::prost::alloc::vec::Vec<u8>,
    /// The parent blocks hash.
    #[prost(bytes = "vec", tag = "2")]
    pub parent_hash: ::prost::alloc::vec::Vec<u8>,
    /// The block number.
    #[prost(uint64, tag = "3")]
    pub number: u64,
    /// The block timestamp.
    #[prost(uint64, tag = "4")]
    pub ts: u64,
}
/// A struct describing a transaction.
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct Transaction {
    /// The transaction hash.
    #[prost(bytes = "vec", tag = "1")]
    pub hash: ::prost::alloc::vec::Vec<u8>,
    /// The sender of the transaction.
    #[prost(bytes = "vec", tag = "2")]
    pub from: ::prost::alloc::vec::Vec<u8>,
    /// The receiver of the transaction.
    #[prost(bytes = "vec", tag = "3")]
    pub to: ::prost::alloc::vec::Vec<u8>,
    /// The transactions index within the block.
    /// TODO: should this be uint32? to match the type from the native substream type?
    #[prost(uint64, tag = "4")]
    pub index: u64,
}
/// A custom struct representing an arbitrary attribute of a protocol component.
/// This is mainly used by the native integration to track the necessary information about the protocol.
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct Attribute {
    /// The name of the attribute.
    #[prost(string, tag = "1")]
    pub name: ::prost::alloc::string::String,
    /// The value of the attribute.
    #[prost(bytes = "vec", tag = "2")]
    pub value: ::prost::alloc::vec::Vec<u8>,
    /// The type of change the attribute underwent.
    #[prost(enumeration = "ChangeType", tag = "3")]
    pub change: i32,
}
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct ProtocolType {
    #[prost(string, tag = "1")]
    pub name: ::prost::alloc::string::String,
    #[prost(enumeration = "FinancialType", tag = "2")]
    pub financial_type: i32,
    #[prost(message, repeated, tag = "3")]
    pub attribute_schema: ::prost::alloc::vec::Vec<Attribute>,
    #[prost(enumeration = "ImplementationType", tag = "4")]
    pub implementation_type: i32,
}
/// A struct describing a part of the protocol.
///
/// Note: For example this can be a UniswapV2 pair, that tracks the two ERC20 tokens used by the pair,
/// the component would represent a single contract. In case of VM integration, such component would
/// not need any attributes, because all the relevant info would be tracked via storage slots and balance changes.
/// It can also be a wrapping contract, like WETH, that has a constant price, but it allows swapping tokens.
/// This is why the name ProtocolComponent is used instead of "Pool" or "Pair".
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct ProtocolComponent {
    /// A unique identifier for the component within the protocol.
    /// Can be e.g. a stringified address or a string describing the trading pair.
    #[prost(string, tag = "1")]
    pub id: ::prost::alloc::string::String,
    /// Addresses of the ERC20 tokens used by the component.
    #[prost(bytes = "vec", repeated, tag = "2")]
    pub tokens: ::prost::alloc::vec::Vec<::prost::alloc::vec::Vec<u8>>,
    /// Addresses of the contracts used by the component.
    /// Usually it is a single contract, but some protocols use multiple contracts.
    #[prost(bytes = "vec", repeated, tag = "3")]
    pub contracts: ::prost::alloc::vec::Vec<::prost::alloc::vec::Vec<u8>>,
    /// Static attributes of the component.
    /// These attributes MUST be immutable. If it can ever change, it should be given as an EntityChanges for this component id.
    /// The inner ChangeType of the attribute has to match the ChangeType of the ProtocolComponent.
    #[prost(message, repeated, tag = "4")]
    pub static_att: ::prost::alloc::vec::Vec<Attribute>,
    /// Type of change the component underwent.
    #[prost(enumeration = "ChangeType", tag = "5")]
    pub change: i32,
    /// / Represents the functionality of the component.
    #[prost(message, optional, tag = "6")]
    pub protocol_type: ::core::option::Option<ProtocolType>,
    /// Transaction where this component was created
    #[prost(message, optional, tag = "7")]
    pub tx: ::core::option::Option<Transaction>,
}
/// A struct for following the changes of Total Value Locked (TVL) of a protocol component.
///
/// Note that if a ProtocolComponent contains multiple contracts, the TVL is tracked for the component as a whole.
/// E.g. for UniswapV2 pair WETH/USDC, this tracks the USDC and WETH balance of the pair contract.
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct BalanceChange {
    /// The address of the ERC20 token whose balance changed.
    #[prost(bytes = "vec", tag = "1")]
    pub token: ::prost::alloc::vec::Vec<u8>,
    /// The new balance of the token. Note: it must be a big endian encoded int.
    #[prost(bytes = "vec", tag = "2")]
    pub balance: ::prost::alloc::vec::Vec<u8>,
    /// The id of the component whose TVL is tracked.  Note: This MUST be utf8 encoded.
    /// If the protocol component includes multiple contracts, the balance change must be aggregated to reflect how much tokens can be traded.
    #[prost(bytes = "vec", tag = "3")]
    pub component_id: ::prost::alloc::vec::Vec<u8>,
}
// Native entities

/// A component is a set of attributes that are associated with a custom entity.
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct EntityChanges {
    /// A unique identifier of the entity within the protocol.
    #[prost(string, tag = "1")]
    pub component_id: ::prost::alloc::string::String,
    /// The set of attributes that are associated with the entity.
    #[prost(message, repeated, tag = "2")]
    pub attributes: ::prost::alloc::vec::Vec<Attribute>,
}
// VM entities

/// A key value entry into contract storage.
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct ContractSlot {
    /// A contract's storage slot.
    #[prost(bytes = "vec", tag = "2")]
    pub slot: ::prost::alloc::vec::Vec<u8>,
    /// The new value for this storage slot.
    #[prost(bytes = "vec", tag = "3")]
    pub value: ::prost::alloc::vec::Vec<u8>,
}
/// Changes made to a single contract's state.
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct ContractChange {
    /// The contract's address
    #[prost(bytes = "vec", tag = "1")]
    pub address: ::prost::alloc::vec::Vec<u8>,
    /// The new balance of the contract, empty bytes indicates no change.
    #[prost(bytes = "vec", tag = "2")]
    pub balance: ::prost::alloc::vec::Vec<u8>,
    /// The new code of the contract, empty bytes indicates no change.
    #[prost(bytes = "vec", tag = "3")]
    pub code: ::prost::alloc::vec::Vec<u8>,
    /// The changes to this contract's slots, empty sequence indicates no change.
    #[prost(message, repeated, tag = "4")]
    pub slots: ::prost::alloc::vec::Vec<ContractSlot>,
    /// Whether this is an update, a creation or a deletion.
    #[prost(enumeration = "ChangeType", tag = "5")]
    pub change: i32,
}
// Aggregate entities

/// A set of changes aggregated by transaction.
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct TransactionChanges {
    /// The transaction instance that results in the changes.
    #[prost(message, optional, tag = "1")]
    pub tx: ::core::option::Option<Transaction>,
    /// Contains the changes induced by the above transaction, aggregated on a per-contract basis.
    /// Contains the contract changes induced by the above transaction, usually for tracking VM components.
    #[prost(message, repeated, tag = "2")]
    pub contract_changes: ::prost::alloc::vec::Vec<ContractChange>,
    /// Contains the entity changes induced by the above transaction.
    /// Usually for tracking native components or used for VM extensions (plugins).
    #[prost(message, repeated, tag = "3")]
    pub entity_changes: ::prost::alloc::vec::Vec<EntityChanges>,
    /// An array of newly added components.
    #[prost(message, repeated, tag = "4")]
    pub component_changes: ::prost::alloc::vec::Vec<ProtocolComponent>,
    /// An array of balance changes to components.
    #[prost(message, repeated, tag = "5")]
    pub balance_changes: ::prost::alloc::vec::Vec<BalanceChange>,
}
/// A set of transaction changes within a single block.
/// This message must be the output of your substreams module.
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct BlockChanges {
    /// The block for which these changes are collectively computed.
    #[prost(message, optional, tag = "1")]
    pub block: ::core::option::Option<Block>,
    /// The set of transaction changes observed in the specified block.
    #[prost(message, repeated, tag = "2")]
    pub changes: ::prost::alloc::vec::Vec<TransactionChanges>,
}
/// Enum to specify the type of a change.
#[derive(Clone, Copy, Debug, PartialEq, Eq, Hash, PartialOrd, Ord, ::prost::Enumeration)]
#[repr(i32)]
pub enum ChangeType {
    Unspecified = 0,
    Update = 1,
    Creation = 2,
    Deletion = 3,
}
impl ChangeType {
    /// String value of the enum field names used in the ProtoBuf definition.
    ///
    /// The values are not transformed in any way and thus are considered stable
    /// (if the ProtoBuf definition does not change) and safe for programmatic use.
    pub fn as_str_name(&self) -> &'static str {
        match self {
            ChangeType::Unspecified => "CHANGE_TYPE_UNSPECIFIED",
            ChangeType::Update => "CHANGE_TYPE_UPDATE",
            ChangeType::Creation => "CHANGE_TYPE_CREATION",
            ChangeType::Deletion => "CHANGE_TYPE_DELETION",
        }
    }
    /// Creates an enum from field names used in the ProtoBuf definition.
    pub fn from_str_name(value: &str) -> ::core::option::Option<Self> {
        match value {
            "CHANGE_TYPE_UNSPECIFIED" => Some(Self::Unspecified),
            "CHANGE_TYPE_UPDATE" => Some(Self::Update),
            "CHANGE_TYPE_CREATION" => Some(Self::Creation),
            "CHANGE_TYPE_DELETION" => Some(Self::Deletion),
            _ => None,
        }
    }
}
#[derive(Clone, Copy, Debug, PartialEq, Eq, Hash, PartialOrd, Ord, ::prost::Enumeration)]
#[repr(i32)]
pub enum FinancialType {
    Swap = 0,
    Lend = 1,
    Leverage = 2,
    Psm = 3,
}
impl FinancialType {
    /// String value of the enum field names used in the ProtoBuf definition.
    ///
    /// The values are not transformed in any way and thus are considered stable
    /// (if the ProtoBuf definition does not change) and safe for programmatic use.
    pub fn as_str_name(&self) -> &'static str {
        match self {
            FinancialType::Swap => "SWAP",
            FinancialType::Lend => "LEND",
            FinancialType::Leverage => "LEVERAGE",
            FinancialType::Psm => "PSM",
        }
    }
    /// Creates an enum from field names used in the ProtoBuf definition.
    pub fn from_str_name(value: &str) -> ::core::option::Option<Self> {
        match value {
            "SWAP" => Some(Self::Swap),
            "LEND" => Some(Self::Lend),
            "LEVERAGE" => Some(Self::Leverage),
            "PSM" => Some(Self::Psm),
            _ => None,
        }
    }
}
#[derive(Clone, Copy, Debug, PartialEq, Eq, Hash, PartialOrd, Ord, ::prost::Enumeration)]
#[repr(i32)]
pub enum ImplementationType {
    Vm = 0,
    Custom = 1,
}
impl ImplementationType {
    /// String value of the enum field names used in the ProtoBuf definition.
    ///
    /// The values are not transformed in any way and thus are considered stable
    /// (if the ProtoBuf definition does not change) and safe for programmatic use.
    pub fn as_str_name(&self) -> &'static str {
        match self {
            ImplementationType::Vm => "VM",
            ImplementationType::Custom => "CUSTOM",
        }
    }
    /// Creates an enum from field names used in the ProtoBuf definition.
    pub fn from_str_name(value: &str) -> ::core::option::Option<Self> {
        match value {
            "VM" => Some(Self::Vm),
            "CUSTOM" => Some(Self::Custom),
            _ => None,
        }
    }
}
/// A message containing relative balance changes.
///
/// Used to track token balances of protocol components in case they are only
/// available as relative values within a block.
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct BalanceDelta {
    /// The ordinal of the balance change. Must be unique & deterministic over all balances
    /// changes within a block.
    #[prost(uint64, tag = "1")]
    pub ord: u64,
    /// The tx hash of the transaction that caused the balance change.
    #[prost(message, optional, tag = "2")]
    pub tx: ::core::option::Option<Transaction>,
    /// The address of the ERC20 token whose balance changed.
    #[prost(bytes = "vec", tag = "3")]
    pub token: ::prost::alloc::vec::Vec<u8>,
    /// The delta balance of the token.
    #[prost(bytes = "vec", tag = "4")]
    pub delta: ::prost::alloc::vec::Vec<u8>,
    /// The id of the component whose TVL is tracked.
    /// If the protocol component includes multiple contracts, the balance change must be
    /// aggregated to reflect how much tokens can be traded.
    #[prost(bytes = "vec", tag = "5")]
    pub component_id: ::prost::alloc::vec::Vec<u8>,
}
/// A set of balances deltas, usually a group of changes within a single block.
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct BlockBalanceDeltas {
    #[prost(message, repeated, tag = "1")]
    pub balance_deltas: ::prost::alloc::vec::Vec<BalanceDelta>,
}
/// A message containing protocol components that were created by a single tx.
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct TransactionProtocolComponents {
    #[prost(message, optional, tag = "1")]
    pub tx: ::core::option::Option<Transaction>,
    #[prost(message, repeated, tag = "2")]
    pub components: ::prost::alloc::vec::Vec<ProtocolComponent>,
}
/// All protocol components that were created within a block with their corresponding tx.
#[allow(clippy::derive_partial_eq_without_eq)]
#[derive(Clone, PartialEq, ::prost::Message)]
pub struct BlockTransactionProtocolComponents {
    #[prost(message, repeated, tag = "1")]
    pub tx_components: ::prost::alloc::vec::Vec<TransactionProtocolComponents>,
}
// @@protoc_insertion_point(module)